Fabrication Of Advance Impeller For Lifting Fluid At Certain Height By Limited Rpm Without Using Electricity
- Prof. K. N. Wagh
- Mr. Shraddha Kamanwar
Impeller, human powered pump analysis.
As per the technical evolution and latest technological trends taken into consideration so here effectively created an optimistic system i.e. “Fabrication of advance impeller for lifting fluid at certain height by limited rpm without using electricity.” The manufacturing of this project is followed by using Human Power and available resources taken into consideration so that this will be helpful for common man in their daily life. This project works on the human power so that; there is no utilization of any electricity. This project can be useful in the agricultural area to provide water supply to plants where electricity is not available. This project can be use where there is requirement to lift water and oil towards overhead tank for any relevant application. Projects works on the bicycle pedal gear and related setup. Initially with the use of basic things available, that is Driver front Sprocket pedal gear, driven element (Sprocket gear) and chain. In this project, pumping of water done by impeller which is created vacuum according to fluid movement, so that fluid can be able access from anywhere and lift at the top of the building while vacuum creation is very much important task which is taken into consideration.
Impeller fabrication is very much important for lifting of liquid towards overhead container. The designing and fabrication of impeller is created is according to type of liquid. There are many types of liquid i.e. water, oil, petrol, diesel, crude oil etc. this project here used hybrid impeller so as to lift any liquid towards overhead container. In this project here used advanced impeller with multiple blade arrangement for water lifting with thick dimensions shown above.
This project uses two individual impeller. One impeller works on clockwise rotation and another impeller works on anticlockwise direction. Over single pedal rotation can able to move two different impeller. One impeller for clockwise movement and another impeller for anticlockwise movement. This impeller is like curves shape so as to lift maximum liquid towards overhead container. The spacing between the impeller and hollow cylinder will decide the lifting of liquid towards overhead distance. The minimum spacing between the impeller and cylinder can able to lift up to maximum distance.
Prof. K. N. Wagh, Mr. Shraddha Kamanwar. "Fabrication Of Advance Impeller For Lifting Fluid At Certain Height By Limited Rpm Without Using Electricity".INTERNATIONAL JOURNAL OF ENGINEERING DEVELOPMENT AND RESEARCH ISSN:2321-9939, Vol.5, Issue 4, pp.1465-1471, URL :https://rjwave.org/ijedr/papers/IJEDR1704232.pdf
Volume 5 Issue 4
Pages. 1465-1471